3.0in. Track Series Cat-Back Muffler Delete Exhaust System with 4.5in. Carbon Fiber/Black PVD Flat Cut Tips
CORSA Performance C8 Track Series Exhaust with 4.5 in. Carbon Fiber Flat Cut Black PVD Tips. Pure Sound. No Restrictions. Made for the track, not your neighbors. CORSA Performance Track Series C8 cat back exhaust systems are designed exclusively to eliminate restrictions, maximize weight savings, and bring the noise. Each system has been Track-Tested and Dyno proven to maximize performance producing up to 18 HP and 16 LBS Ft. of TQ. All while shaving 27 pounds from the stock exhaust system.
- CORSAs Most Aggressive Exhaust Note.Xtreme Sound Level
- 3.0 in 304 Stainless Steel Construction
- Features All Hardware Necessary For Installation
- Lifetime Warranty
- Made In The USA
- Features Twin CORSa 4.5 in Straight Cut Carbon Fiber Tips W/ Polished Dual Wall Stainless Steel Cone.
- Ideal For Aggressive Drivers Primarily Driving The Car In V8 Track Mode Only.
- Features Afm Machined Valve Simulator Brackets For Proper AFM Actuator Motor Alignment
- Dyno Tested Gains Of Up To 18 HP And 16 Lbs. FT. TQ
- 13 in. Decibels Louder Than Stock
- 27 Pounds Lighter Than The Stock Exhaust
Application Summary:
| Year |
Make/Model |
| 2020-2025 |
Chevrolet Corvette |
| Attributes |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) |
US |
| Exhaust Type |
Cat-Back |
| Exit Position |
Dual Rear |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Inlet Inside Diameter |
3.000 in. |
| Life Cycle Status Code |
Available to Order |
| Material |
Stainless Steel |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| Tail Pipe Diameter |
3.000 in. |
| Tip Diameter |
4.500 in. |
| Tubing Diameter |
3.000 in. |
| GTIN |
00847466029967 |
