SPECIAL ORDER: 4400 Series Truck Pull: Ford 1969-78 BBF 429/460: 1-1/16 x 10 Spline: 180T
The 4400 Series clutch system from McLeod is ideal for Truck Pulling and high horsepower sand drag applications. Recommended for non-shifting motorsport applications. This series features a Borg & Beck/Long pressure plate assembly, unique to McLeod that also includes counterweights providing additional high RPM lockup capacity. Steel flywheels are included with these systems along with low coefficient friction sintered iron discs. Due to the pin style drive on the floater plate, these multi disc clutches are not suitable for street applications as they will be very noisy at idle and low RPM.
- • Borg & Beck long style pressure plate w/counterweights.
• High RPM lock-up capacity.
• Sintered iron discs.
• Steel Flywheel Included.
Information:
SPECIAL ORDER
Application Summary:
| Year |
Make/Model |
| 1978 |
Ford E-100 Econoline |
| 1975-1978 |
Ford E-250 Econoline |
| 1975-1978 |
Ford E-250 Econoline Club Wagon |
| 1975-1978 |
Ford E-350 Econoline |
| 1977-1978 |
Ford E-350 Econoline Club Wagon |
| 1973-1974 |
Ford F-100 |
| 1975-1978 |
Ford F-150 |
| 1973-1978 |
Ford F-250 |
| 1973-1978 |
Ford F-350 |
| 1970-1971 |
Ford Ranchero |
| 1975-1977 |
Ford Ranchero |
| Attributes |
| Alignment Tool Included |
Yes |
| Application |
Truck Pull |
| Casting Material (Donut) |
Billet Aluminum with Steel Heat Shield |
| Clutch Disc Quantity |
2 |
| Clutch Usage |
Performance |
| Counter Weight Kit |
563333 (Sold Separately) |
| Counter Weight Kit if Required |
563333 (sold separately) |
| Counter-weighted Lever |
Adjustable |
| Counterweight Assist |
Yes |
| Country of Origin (Primary) |
US |
| Crankshaft to Flywheel Bolt Quantity |
6-bolt |
| Disc Diameter |
10.5In. |
| Disc Diameter (in.) |
10.500 |
| Disc Material |
Sintered Iron, 5191 Sintered Iron |
| Disc Style |
Full face |
| Emission Code |
Legal US |
| Engine 1 |
1969-1999 BBF 429-460 |
| Engine Balance |
0 Balance, Internal |
| Flywheel Included |
Yes |
| Flywheel Material |
Billet Steel, Billet steel |
| Hardware Included |
Yes |
| Harmonized Tariff Code (Schedule B) |
8708935000 |
| Hazardous Material Code |
N |
| Hub Style |
Solid |
| Input Shaft Diameter (in.) |
1.063 |
| Input Spline Quantity |
10 |
| Input-shaft Spline |
1-1/16 x 10 |
| Lever Material |
Billet Steel |
| Life Cycle Status Code |
Available to Order |
| Make |
Ford |
| NAFTA Preference Criterion Code |
B |
| Notes |
SPECIAL ORDER made to order item. They come with a lead time of 4-6 weeks. |
| Pilot Bushing Included |
No |
| Pressure Plate Style |
Long |
| Quantity |
Sold as a kit. |
| Ring Gear |
180T |
| Ring Gear Tooth Quantity |
180-tooth |
| SDR Required Flag |
N |
| SDS Sheet Number |
N/A |
| Throwout Bearing Included |
No |
| Warranty Time |
90 |
| GTIN |
00887753677846 |
